Relayed from firstname.lastname@example.org
on the funcube yahoo group
It's USB2, an E 5400 based machine with Win7Ultimate.
To recap. The exact process was.....
The machine was a fresh OS install, with all the updates done.
After that, the FC dashboard v848 was downloaded and installed, and the FCD P+ plugged in, and left for a while to find/install the drivers.
Setup for the FCD in the dashboard.
The FCD was avail in tne capture options, so selected that.
Get message ' Unable to capture from FunCUBE Dongle...'
The FCD works fine with the FCHID2 on the win 7 machine.
It appears as the selected recording device on the Win 7 machine. It is referred to as 'Line - 2 Funcube Dongle V2.0'. Shown as enabled and generally happy with the world.
The FCD is fine on the old XP laptop that I have been using up till now.